Samsung DVM PLUS III User Manual

Control Systems
V-10
1
1
Individual control system
OPTION CODE SETTING
1-2. Wireless remote controller
3) Additional functions
MR-AH01
1. Remove batteries from the remote controller.
2. Press Temp. UP and Temp. DOWN buttons at the same time and then insert the batteries again.
3. Press the Mode button to select between upper/lower option codes.
4. Set the option code by pressing Set/Cancel button.
Enter the option code mode Option code setting
Select option page
Press
together
Option code setting
EX) Option code : 066064 - 170373
Page 0 Page 1
MR-BH01
1. Remove batteries from the remote controller.
2. Press OFF Timer button and Cancel button at the same time then reinsert the batteries.
3. Press the Mode button to select between upper/lower option codes.
4. Set the option code by pressing Power button.
Enter the option code mode Option code setting
Select option
page
Press together
Option code
setting
EX) Option code : 066064 - 170373 - 200000 - 300000
Page 0 Page 1 Page 2 Page 3
05-1_control systems(002~045) 3/15/08 4:09 Page 10

Samsung DVM PLUS III Specifications

General

Brand	Samsung
Model	DVM PLUS III
Category	Air Conditioner
Language	English