V-75
C
ONTROL
S
YSTEMS
Ô Centralized controller comm. line connection
• Centralized controller C1, C2 comm. line connection (Check polarity of the comm. line for connection)
2) Function
(1) S-NETII Plus function description
Control and monitoring 1-room control Control and monitor individual group (group control)
or individual indoor unit (room control).
16-room control Control and monitor max. 16 groups below the Centralized
controller (group control) or max. 16 indoor units under the
interface module (room control).
256-room control Control and monitor the entire system (group control) or max. 256
indoor units below the Centralized controller (room control).
Zone control Add zone Add new zone in the zone setup window.
Change the name of zone Change the zone name to an easily recognizable one.
Delete zone Delete a zone in the zone setup window.
Zone control Control all indoor units included in a selected zone.
Schedule control Add a schedule group Add new schedule in the schedule operation window.
Change schedule name Change the name into an easily recognizable one in the schedule
operation setup window.
Delete a schedule group Delete a schedule group in the schedule operation setup window.
Schedule time setup Set the time for schedule operation.
When making a connection,
check the polarity of the comm.line.
T X + ➝ C1
T X - ➝ C2
To Next Page
Loading...
