V-154
Control Systems
4
4
Power distribution system
(1) Watt-hour meter manufacturer connected with the power distribution unit.
(2) Difference between auto/manual mode for indoor FAN power consumption.
• Automatic FAN data setting
- Automatic data setting according to type of indoor unit. (1way, 4way, DUCT…)
- Largely divided into two types depending on the indoor unit’s capacity.
- Depending on a model of indoor unit, default value applies as a set value, instead of accurate FAN data.
- When new FAN motor is employed, it cannot be applicable.
• Manual FAN data setting
- Accurate FAN data setting according to type and model of indoor unit. (1way, 4way, DUCT…)
- Allow detailed setup for FAN activation modes. (low, medium wind, high wind)
- Applicable for newly-introduced FAN motor.
•
Manual setting is required when indoor models are different from each other in the power distribution system.
• With the same indoor models in power distribution system, automatic setting is also applicable.
;
NN
NN
oo
oo
tt
tt
ee
ee
Setup value 1 2 3 4 5 6 7
Watt-meter
Omni
RS485
Micronix
RS485
Reserved
Reserved
LS
Industrial
Systems
China
Londian
HANSUK
TECH
05-4~6_control systems(142~171 3/6/08 14:09 Page 154
To Next Page
Loading...
