Samsung SCL770 - Motor Capstan, Lever Eject, Slider Main Disassembly and Reassembly

3-11 Motor Capstan, Lever Eject, Slider Main
3-11-1 Disassembly
1. Remove 2 screws 1 and lift the Motor Capstan 2 .
2. Turn the Gear Cam Main 5 (arrow “A”) to the
end, Then turn the Lever Eject 3 (arrow “B”)
and lift it.
3. Turn the Gear Cam Main 5 (reverse of arrow
“A”).
4. Remove the Slider Main Ass’y 4 . (arrow “C”)
3-12-2 Reassembly
Reassemble in reverse order.
Samsung Electronics 3-11
Disassembly and Reassembly
Fig. 3-11 Motor Capstan, Lever Eject, Slider Main
4 SLIDER MAIN ASS'Y
3 LEVER EJECT
1 2 SCREWS 2 MOTOR CAPSTAN
5 GEAR CAM MAIN
Fig . A
TIMING
POINT
A
B
C
Note : When reassembling the Gear Cam Main
5 , Align the timing point of the Gear
Mode S/W. (See Fig. A)