128 S&C Instruction Sheet 461-504
Appendix C
Screen Name Description
Static or
Dynamic
(when operating
in the field)
Mode Selector
Status
The mode of operation–either “Auto”, “NR”, or “R-NR”–is displayed. Dynamic
Number of Open
Operations
The total number of vacuum interrupter Open operations is displayed. Dynamic
Remaining Contact
Wear in %
The remaining vacuum interrupter contact wear, in percent, is displayed. Dynamic
LCD Screen
Temperature
The temperature of the LCD screen, in Celsius degrees, is displayed. Dynamic
TCC #0 (Initial Trip) The short name for the Initial Trip curve is displayed. Static
TCC #1 (Test 1) The short name for the Test 1 curve (2nd TCC curve) is displayed. This
screen is automatically skipped if Test 1 operation is disabled.
Static
TCC #2 (Test 2) The short name for the Test 2 curve (3rd TCC curve) is displayed. This
screen is automatically skipped if Test 2 operation is disabled.
Static
TCC #3 (Test 3) The short name for the Test 3 curve (4th TCC curve) is displayed. This
screen is automatically skipped if Test 3 operation is disabled.
Static
Sectionalizing Mode
Counts
The number of counts for Sectionalizing mode is displayed. This screen is
automatically skipped if Sectionalizing mode is disabled.
Static
TABLE CONTINUED ▶
To Next Page
Loading...
