S&C TripSaver II - Page 129

S&C Instruction Sheet 461-504 129
Appendix C
Screen Name Description
Static or
Dynamic
(when operating
in the field)
Interrupting Rating The interrupter rating of the recloser in kA is displayed. Static
Max Rated Voltage The rated max voltage of the recloser: either 15.5 kV or 29.0 kV, is displayed. Static
System Frequency The frequency in Hz, of the electrical system the TripSaver II recloser is
configured for, is displayed.
Static
Software Versions Three pieces of information about software version are displayed:
Application, Bootloader, and Radio Frequency MicroController Unit.
Static
NR #0 (NR/Remote
NR TCC curve)
This is the Standard NR TCC curve. Static
NR #1 (Post Fault
TCC curve)
This is the Post Fault Wakeup NR TCC curve Static
NR #2 (Cold Wake
up TCC curve)
This is the Cold Wakeup NR TCC curve. Static
SC #0 (Sequence
Coordination)
This is the Sequence Coordination TCC curve. "Disabled" will display when
this feature is disabled.
Static