4 Operation and Configuration
116
S84-ex/S86-ex Operator Manual
BACKFEED SPEED
Specify the backfeed speed.
• FAST: Set to a speed of six inches per second.
• NORMAL: Set to a speed of four inches per second.
EURO CODE
Select the symbol for representing the Euro mark (currency symbol).
The setting range is from 00 to FF.
SELECT LANGUAGE
Set the LCD language.
The following languages are available:
•ENGLISH
• FRENCH
•GERMAN
• SPANISH
•ITALIAN
• PORTUGUESE
• CHINESE (Simplified Chinese)
PRIORITY SETTING
Set the priority for the system commands.
• COMMAND: Certain system commands that have been sent to the
printer have the priority to overwrite the printer configuration set by the
LCD operator panel.
• INTERNAL: The above mentioned printer configuration set by the LCD
operator panel will not be replaced by the sent command.
System commands which can be assigned priority are as follows:
Print Darkness <#E>, Print Speed <CS>, Start Point Correction <A3>,
Print Mode <PM>, Print Method <PH>
To Next Page
Loading...
