4 Operation and Configuration
118
S84-ex/S86-ex Operator Manual
COMPATIBLE MODE
Set the compatibility with the printer operation of existing models.
• ON: Keep the compatibility with the printer operation of existing models.
• OFF: Disable the compatibility with the printer operation of existing
models.
Note
For details on the compatible mode, refer to Section 7.3 About
Compatible Mode.
COMPATIBLE MODE HEAD SIZE
Set the head width for S86-ex series models.
The options vary depending on the head density. Corresponding head
width are as follows:
Note
Shows for S86-ex series models only and when COMPATIBLE MODE is
set to ON.
Model Name Option Head Width
(mm)
S86-ex (203 dpi) NORMAL 167.5
M8460Se 152.0
M8485Se 128.0
S86-ex (305 dpi) NORMAL 167.5
M8465Se 152.0
To Next Page
Loading...
