4 Operation and Configuration
65
S84-ex/S86-ex Operator Manual
STANDALONE MODE
Select the following options using the / buttons and then press the
ENTER button.
• LOAD: Read and print the file.
• SAVE: Save the received print data to a file.
Note
Three beeps will sound if you select SAVE and press
the ENTER
button when there is no received data.
INTERFACE SELECT
Select the memory type using the / buttons and then press the
ENTER button.
Note
Three beeps will sound if the connected memory has no data to load or the
selected memory is not connected.
SELECT NUMBER
Select the file number using the / buttons and then press the
ENTER button to load the specified file or save the received data.
The setting range is from 01 to 09.
DATA EXISTS, OVERWRITE?
This screen confirms that you are overwriting a file if you have selected to
save to an existing file number.
Select the following options using the
/ buttons and then press the
ENTER button.
• YES: Overwrite the existing file.
• NO: Cancel the overwrite and return to the SELECT NUMBER screen.
Note
Make sure that you do not need the existing file before overwriting it.
To Next Page
Loading...
