SATO S84 - Page 80

4 Operation and Configuration
78
S84-ex/S86-ex Operator Manual
SNTP FUNCTION
Enable or disable the SNTP function.
• ENABLE: Perform the time correction of the calendar IC.
• DISABLE: Do not perform the time correction of the calendar IC.
Note
Shows only when the calendar IC is installed and the LAN interface is
selected.
NTP SERVER IP
Set the NTP server IP address.
Note
Shows only when the SNTP function is enabled.
TIME ZONE
Set the time zone.
The setting range is from -12:45 to +14:45.
Note
Shows only when the SNTP function is enabled.
ERROR NOTICE
Set whether or not to notify the SNTP function error.
• ENABLE: Shows an error notice when failing to correct the time.
• DISABLE: Does not show an error notice when failing to correct the
time.
Note
Shows only when the SNTP function is enabled.