Schenck Vibrocontrol 110 C01 - Page 73

VC 1100 List of Setup Parameters
VC1100E/paralist Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, Juni 98 C01 / C02 - C11 / C12 5-15
J 15 Channel A : BCU Avertaging
Choises : Y, N
Function : Enable or disable BCU Averaging
Y = Averaging is active
N = Averaging is not active
Condition : Only when BCU on channel A (J11) is active.
J 16 Channel B : BCU Averaging
Choises : Y, N
Function : Enable or disable BCU Averaging
Y = Averaging is active
N = Averaging is not active
Condition : Only when BCU on channel B (J12) is active.
J 17 Channel A : BCU Averaging delay
Range : 10 ... 3600
Dimension : Seconds
Function : Define time constant for BCU averaging chan-
nel A.
Condition : Averaging channel A (J15) = active.
J 18 Channel B : BCU Averaging delay
Range : 10 ... 3600
Dimension : Seconds
Function : Define time constant for BCU averaging chan-
nel B.
Condition : Averaging channel B (J16) = active.