List of Setup Parameters VC 1100
Version 2 → parqalist/VC1100E
5-22 C01 / C02 - C11 / C12 © Schenck VIBRO GmbH, D-64273 Darmstadt, Juni 98
M 01 Channel A : Monitoring
Choises : Y, N
Function : Enable or disable vibration monitoring for channel A
(lim_1, lim_2).
Y = Monitoring for channel A is active.
N = Monitoring for channel A is not active.
M 02 Channel B : Monitoring
Choises : Y, N
Function : Enable or disable vibration monitoring for channel B
(lim_1, lim_2).
Y = Monitoring for channel B is active.
N = Monitoring for channel B is not active.
M 03 Channel A : Monitor lim_1
Choises : Y, N
Function : Enable or disable monitoring of limit value lim_1 A.
Y = Monitoring lim_1 A.
N = Do not monitoring lim_1 A.
M 04 Channel B : Monitor lim_1
Choises : Y, N
Function : Enable or disable monitoring of limit value lim_1 B.
Y = Monitoring lim_1 B.
N = Do not monitoring lim_1 B.
To Next Page
Loading...