Schenck Vibrocontrol 110 C01 - Page 81

VC 1100 List of Setup Parameters
VC1100E/paralist Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, Juni 98 C01 / C02 - C11 / C12 5-23
M 05 Channel A : Monitor lim_2
Choises : Y, N
Function : Enable or disable monitoring of limit value lim_2 A.
Y = Monitoringlim_2 A.
N = Do not monitoring lim_2 A.
M 06 Channel B : Monitor lim_2
Choises : Y, N
Function : Enable or disable monitoring of limit value lim_2 A.
Y = Monitoringlim_2 A.
N = Do not monitoring lim_2 A.
M 07 Channel A : Monitor lim_b
Choises : Y, N
Function : Enable or disable monitoring of limit value lim_b
(BCU channel A).
Y = Monitoring lim_b.
N = Do not monitoring lim_b.
M 08 Channel B : Monitor lim_b
Choises : Y, N
Function : Enable or disable monitoring of limit value lim_b
(BCU channel B).
Y = Monitoring lim_b.
N = Do not monitoring lim_b.