List of Setup Parameters VC 1100
Version 2 → parqalist/VC1100E
5-30 C01 / C02 - C11 / C12 © Schenck VIBRO GmbH, D-64273 Darmstadt, Juni 98
N 07 Relais K1 : Latching
Choises : Y, N
Function : Select latching or non-latching operation for relay K1.
Y = Relay K1 latches.
N = Relay K1 does not latch.
N 08 Relais K2 : Latching
Choises : Y, N
Function : Select latching or non-latching operation for relay K2.
Y = Relay K2 latches.
N = Relay K2 does not latch.
N 09 Relais K3 : Latching
Choises : Y, N
Function : Select latching or non-latching operation for relay K3.
Y = Relay K3 latches.
N = Relay K3 does not latch.
N 10 Relais K1 : Normally Energized
Choises : Y, N
Function : Select normally energized or normally de-energized
mode for relay K1
Y = Relay K1 operates normally energized.
N = Relay K1 operates normally de-energized.
To Next Page
Loading...