What to do if scinco Mega-800 doesn't operate after turning on?
If your scinco Measuring Instruments fails to operate after being powered on, check the following: * Ensure the power cable is securely connected. * Replace the fuse (2A) if it's blown. * If the issue persists, it may be due to a circuit failure.
Why is there noise abnormality in scinco Mega-800 Measuring Instruments?
Noise abnormalities in your scinco Measuring Instruments can stem from several factors: * The light source may be aging, consider replacing it. * The sample compartment might be incorrectly positioned; reposition it. * Low voltage or a strong magnetic field could be interfering; add a voltage stabilizer or eliminate the interference.
What to do if scinco Mega-800 Measuring Instruments spectrum cannot be printed out?
If the spectrum from your scinco Measuring Instruments cannot be printed, verify the connection cable is securely connected.
How to troubleshoot initialization abnormality in scinco Measuring Instruments?
For initialization abnormalities in your scinco Measuring Instruments related to multi-cell origin, remove any obstacles. If the issue is with the slit mechanism, try tightening the connecting mechanism. If an opaque object is in the sample compartment, remove it. For issues related to the D2 lamp, reposition it.
General| Brand | scinco |
|---|---|
| Model | Mega-800 |
| Category | Measuring Instruments |
| Language | English |
To Next Page