75 Mega-800 SCINCO
Fig. 10.4 Install the 8-cell holder
Appendix 3 Fuse replacement
This chapter introduces the user how to replace the fuse. If you suspect the fuse is brown, please
replace it according to the following procedures.
Switch off the instrument.
Remove the fuse holder by a big plain screwdriver, as shown in Fig. 12.1.
Fig. 11.1 Remove the fuse holder
Remove the old fuse, and replace it with a new one. And then install the fuse holder. The fuse
replacement has finished.
Fig. 11.2 Replace the fuse
Note:
Please select the same fuse when replacing it.
To Next Page
Loading...