Sharp MX-M264N - Other Related Items

MX-M264U MAINTENANCE 9 – 3
2. Other related items
A. Counter clear
*: When maintenance message is displayed, replace consumption part reaching the number of sheets of maintenance, then clear the replaced
part's counter only.
Paper feed/
Transport/
Paper exit
sections
Paper feed Pickup roller ✕  –  –  – Part replacement reference:
100K or 1 year of use
Separation sheet ✕✕– ✕✕✕– ✕✕✕– Part replacement reference:
100K or 1 year of use
Transport rollers ✕  –  –  –
Gears ✕✕– ✕✕✕– ✕✕✕–
Discharge brush ✕✕– ✕✕✕– ✕✕✕–
Transport paper
guides
–  –  –
Sensors ✕✕– ✕✕✕– ✕✕✕–
Others Ozone filter –  –  –
Gear ✩✩– ✩✩✩– ✩✩✩ – When checking, apply to the
necessary positions.
(Specified positions)
Optical
system
Mirror/Lens/Reflector/
CCD
–  –  –
Table glass/SPF glass –  –  –
Scanner lamp –  –  –
Rails ✩✩– ✩✩✩ – ✩✩✩
–
Drive belt/drive wire ✕✕– ✕✕✕– ✕✕✕–
Sensors ✕✕– ✕✕✕– ✕✕✕–
RSPF Paper feed
section/
Transport
section
Paper feed roller –  –  – Replacement reference:
Replace according to the SPF
paper feed counter value.
SPF section roller:
100K or 1 year of use
When replacing the paper feed
roller, apply grease to the
paper feed shaft. (GP-501MR)
Pickup roller –  –  –
Separation roller –  –  –
Torque limiter SPF
(for separation)
✕✕– ✕✕✕– ✕✕✕– Replacement reference:
Replace according to the SPF
paper feed counter value.
SPF section torque limiter:
400K or 2 years of use
When replacing the paper feed
roller, apply grease to the
paper feed shaft. (GP-501MR)
Takeup torque limiter
(for takeup)
✕✕– ✕✕✕– ✕✕✕–
Discharge brush ✕✕– ✕✕✕– ✕✕✕–
Transport rollers –  –  –
Sensors ✕✕– ✕✕✕– ✕✕✕–
Scanning plate –  –  –
Drive
section
Gears ✕✕– ✕✕✕– ✕✕✕–
Belts ✕✕– ✕✕✕– ✕✕✕–
Other OC mat
–  –  –
Item SIM Remarks
Maintenance cycle setting SIM 21-1
Jam/trouble counter clear SIM 24-1
Paper feed counter clear SIM 24-2
Scan/Stapler/Stamp counter clear SIM 24-3
Maintenance counter clear SIM 24-4 *
Developing counter clear SIM 24-5 At developer replacement
Copy counter clear SIM 24-6
Printer/other counter clear SIM 24-9
FAX counter clear SIM 24-10
Scanner mode counter clear SIM 24-15
When
calling
100
k
150
k
200
k
300
k
400
k
450
k
500
k
600
k
700
k
750
k
Remark