MX-M264U SPECIFICATIONS 2 – 11
(13) Telephone functions
(14) Sound settings
(15) Others
6. Power consumption
The full configuration can be operated with the rated power source.
*1: At power-on timing
(with condition of dehumidify heater turned OFF)
7. Dimensions and weight
Mode FAX
On-hook function Yes
Hold No
Setting of pause time Yes (1 – 15 seconds)
Telephone transmission during
power outage
No (External telephone transmission
allowed)
Tone pulse switching Tone, Pulse, Auto (North America/
Taiwan)
* For the other destinations, set with
the soft switch.
Mode Item FAX
On-hook sound Sound volume setting 1 - 9
Sound volume for calling Sound volume setting 1 - 9, No
Line monitor sound Sound volume setting 1 - 9, No
Reception sound Sound volume setting 1 - 9, No
Transmission success sound Sound volume setting 1 - 9, No
Transmission and reception
error sound
Sound volume setting 1 - 9, No
Sound setting for end of
original reading (image send)
Sound volume setting Large/middle/
small/no sound
Mode FAX
PC-FAX Yes
FAST Yes (SEC only)
Network FAST No
Distinctive ring detection Setting for each destination
Maximum rated power
Consumption
*1
100 V 200 V
1.44 kW 1.84 kW
Energy consumption
rate
Not applicable
TEC value (Measured
result)
26cpm machine:
1.8 kWh
31cpm machine:
2.3 kWh
35cpm machine:
2.4 kWh
26cpm machine:
1.84 kWh
31cpm machine:
2.25 kWh
35cpm machine:
2.35 kWh
TEC value (Standard)
Tier2
26cpm machine:
3.10 kWh (0.1 kwh x 26 + 0.5 kwh)
31cpm machine:
4.85 kWh (0.35 kWh x 31 - 6.0 kWh)
35cpm machine:
6.25 kWh (0.35 kWh x 35 - 6.0 kWh)
Power consumption is
1W in standby for NW
* Condition of
Standing by
Network:
Connected with
TCP/IP protocol
only
Yes
(Exclude the case of
use Fax and Network
at once)
–
Moving time to pre-
heat mode
1 minutes (default)
Recovery time from
pre-heat mode
10 sec.
Moving time to sleep
mode
1 minutes (default) 11 minutes (Europe)
* Printer mode: 10sec. (default)
Recovery time from
sleep mode
20 sec.
Outer dimension
(Included operation panel)
W625 x D645 x H652 mm
When the OC is installed:
W625 x D645 x H686 mm
When the RSPF is installed:
W625 x D645 x H799 mm
Footprint W625 x D645 mm
Dimension occupied by the
machine
W902 x D645 mm
(when the bypass tray is extended)
Weight
Main Unit
(including photoreceptor /
not including consumables)
When the RSPF is installed:
51.6 kg (100V type)
52.1 kg (200V type)
When the OC is installed: 46.5 kg
When the RSPF/OC is not installed: 44.9 kg
To Next Page
Loading...
