MX-M264U CONSUMABLE PARTS 3 – 2
2. Maintenance parts list
A. North America, Middle America, South America
* The other maintenance parts than the above are supplied as service parts.
B. SEGA/ SUK/ SCA/ SCNZ/ SEA/ SEES/ SEZ/ SEIS/ SEB/ SEN/ SEF/ SMEF/ Russia/ Special country
* The other maintenance parts than the above are supplied as service parts.
No. Item Content Life Model name Remarks
1 Upper heat roller kit Upper heat roller x 1 150K AR-310UH
Fuser gear x 1
Upper heat roller bearing x 2
Upper cleaning pad x 1
Fusing separation pawl (upper) x 4
Thermistor cleaning pad x 2
2 Lower heat roller kit Lower heat roller x 1 300K MX-311LH
Fusing separation pawl (lower) x 4
Fuser bearing (lower) x 2
3 150K maintenance kit Drum separation pawl unit x 2 150K MX-311KA
Transfer roller unit x 1
DV blabe x 1
DV side sheet F x 1
DV side sheet R x 1
Toner filter unit x 1
4 MC unit MC unit x 10 26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311MC
5 Cleaner blade Cleaner blade x 10 26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311CB
6 Drum frame unit Drum frame unit x 1 26cpm: 225K
31/35cpm: 300K
MX-311DU * The life of the toner reception seat attached
to the drum frame is 300K, and it can be
used up to 3 times.
(Supplied as a drum frame unit.)
7 Transfer roller unit Transfer roller unit x 1 150K MX-311TX
8 Paper feed roller kit Paper feed roller kit x 1 100K MX-311RT
9 Fusing unit Fusing unit (120V heater lamp) x 1 150K MX-311FU
10 Staple cartridge Staple cartridge x 3 5000 staples x 3 MX-SCX1
No. Item Content Life Model name Remarks
1 Upper heat roller kit Upper heat roller x 1 150K AR-310UH
Fuser gear x 1
Upper heat roller bearing x 2
Upper cleaning pad x 1
Fusing separation pawl (upper) x 4
Thermistor cleaning pad x 2
2 Lower heat roller kit Lower heat roller x 1 300K MX-311LH
Fusing separation pawl (lower) x 4
Fuser bearing (lower) x 2
3 150K PM kit Drum separation pawl unit x 2 150K MX-311KA
Transfer roller unit x 1
DV blade x 1
DV side sheet F x 1
DV side sheet R x 1
Toner filter unit x 1
4 MC unit MC unit x 10 26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311MC
5 Cleaner blade Cleaner blade x 10 26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311CB
6 Drum frame unit Drum frame unit x 1 26cpm: 225K
31/35cpm: 300K
MX-311DU * The life of the toner reception seat attached
to the drum frame is 300K, and it can be
used up to 3 times.
(Supplied as a drum frame unit.)
7 Transfer roller unit Transfer roller unit x 1 150K MX-311TX
8 Staple cartridge Staple cartridge x 3 5000 staples x 3 MX-SCX1
To Next Page
Loading...
