EXTENSION BOARD (AUL-9086)
Eight slot cabinet models include an extension board. This provides connections for 4 additional modules to be
used with the Aura Fire Alarm ControlPanel. In this type of configuration, the extension board is installed to the
right of the Main Back Board on the backplate.
WARNING! Separate high and low voltage wiring in the enclosure with a minimum gap of 0.25". ACpower lines
should be routed through a dedicated conduit.
Refer to the following illustration when wiring the Extension Board.
SHIELD Fire, Safety & Security Ltd
Aura Fire Alarm Control Panel Installation Manual
Version 1.00 |June 2019 |MAN-1431VS
Page 82
Extension Board (AUL-9086)
To Next Page
Loading...
