l Buzzer Silence:Press Buzzer Silence to silence the panel buzzer.
l Reset System:Press Reset System.
CO
In the event of a COAlarm, the following things happen:
l the COAlarm indicator on the front of the panel illuminates yellow
l the applicable indicator on the Zone LED Board flashes (if connected)
l the panel GUI displays details about the COAlarm
l CO warning notification appliances activate as programmed
l the panel buzzer activates
With Access Level 2 or higher, the following functions are available:
l Silence Alarms:Press Activate Controls> Silence Alarms to silence notification appliances. They
can be reactivated by pressing the Re-Sound Alarm button.
l Buzzer Silence:Press Buzzer Silence to silence the panel buzzer.
l Reset System:Press Reset System.
Trouble
If there is a trouble on the system, the following things will happen:
l the General Trouble indicator on the front of the panel flashes yellow
There may be other trouble LED indications which identify the nature of the trouble.
l panel outputs programmed to operate in the event of a trouble, such as the Trouble Relay and Trouble
Routing outputs, will activate
l the panel GUI displays details about the Trouble
l the panel buzzer activates
Troubles will typically reset automatically once the condition has cleared. With Access Level 2 or higher, the
following functions are available:
l Silence Alarms:Press Activate Controls> Silence Alarms to silence notification appliances. They
can be reactivated by pressing the Re-Sound Alarm button.
l Buzzer Silence:Press Buzzer Silence to silence the panel buzzer.
l Reset System:Press Reset System.
Events and Status
SHIELD Fire, Safety & Security Ltd
Aura Fire Alarm Control Panel Installation Manual
Version 1.00 |June 2019 |MAN-1431VS
Page 95
To Next Page
Loading...
