Shield Aura - Supervisory; Disablement; Other Events

Supervisory
If there is a Supervisory Alarm on the system:
l the Supervisory Alarm indicator on the front of the panel illuminates yellow
l panel outputs programmed to operate in the case of a Supervisory event, such as the Supervisory Relay,
will activate
l the panel buzzer activates
l the panel GUI displays details about the Supervisory Alarm
Supervisory Alarms will typically reset automatically once the condition has cleared (device may be programmed
latching or non-latching). With Access Level 2 or higher, the following functions are available:
l Silence Alarms:Press Activate Controls> Silence Alarms to silence notification appliances. They
can be reactivated by pressing the Re-Sound Alarm button.
l Buzzer Silence:Press Buzzer Silence to silence the panel buzzer.
l Reset System:Press Reset System.
Disablement
If there is a Disablement on the system:
l the Disablements indicator on the front of the panel illuminates yellow
l the panel buzzer activates
l the panel GUI displays details about the Disablement
If one or more disablements are active, the panel generates a trouble. Refer to the Trouble section above.
Disablements will reset automatically once the device or zone has been re-enabled. With Access Level 2 or
higher, the following functions are available:
l Silence Alarms:Press Activate Controls> Silence Alarms to silence notification appliances. They
can be reactivated by pressing the Re-Sound Alarm button.
l Buzzer Silence:Press Buzzer Silence to silence the panel buzzer.
l Reset System:Press Reset System.
Other Events
Other event statuses are displayed in the Controls & Other Events tab.
SHIELD Fire, Safety & Security Ltd
Aura Fire Alarm Control Panel Installation Manual
Version 1.00 |June 2019 |MAN-1431VS
Page 96
Events and Status