10
n
Precautions Related to Installation Work
!
CAUTION
Do not connect anything other than peripheral devices specied by
Shimadzu to the balance’s connector.
If you do, the balance may stop working normally.
In order to avoid trouble, always connect peripheral devices in accordance with the directions in this manual.
Use the correct power supply and voltage with the AC adapter supplied.
Usingthebalancewithanincorrectpowersupplyorvoltagemayresultintheoutbreakofreormalfunctions.Notealsothatif
thepowersupplyorvoltageisunstableorifthepowersupplycapacityisinsufcient,itwillnotbepossibletoobtainsatisfactory
performance from the balance.
Install measures to prevent the balance from toppling over in the event of
earthquakes, etc.
If the balance topples over as a direct result of vibrations, it may result in injury.
Plug the AC adapter into an easily accessible power outlet.
During emergencies, it is necessary to unplug the AC adaptor from the power outlet.
Beware of the gaps between equipment during installation.
Failuretoobservethismayresultinngersgettingcaught,leadingtoinjury.
Placengersontheindentationsonthesidesoftheunitandgripitrmlywithbothhandsduringinstallation.
n
Precautions Related to Work/Operations
!
CAUTION
Do not operate the ionizer when measuring items that are explosive or inammable.
Failuretoobservethismayresultinignitionandtheoutbreakofre.
Use the correct weighing units.
Using incorrect weighing units can lead to accidents as a result of weighing errors. Check that the weighing units are correct before starting weighing.
Treat the balance with care and respect.
The balance is a precision instrument. Subjecting it to impact may result in malfunctions. When moving the balance, remove
thepan,thepansupporterandthepanring,inplace,andgraspitrmlywithbothhandswhencarryingit.Ifthebalanceistobe
stored for long periods of time, place it in the packaging box which was used for delivery and store it in a safe location with few
temperatureuctuations.
n
Risks Involved in Repairs/Dismantling/Modications
!
CAUTION
Never disassemble, modify or attempt to repair this product or any accessory.
You could sustain an electric shock or the product could operate abnormally. If you believe that the balance has failed, contact
your Shimadzu representative.