11
n
Precautions Related to Inspections/Maintenance
!
CAUTION
The design standard period of usage for this product is ten years. Using
the product for more than the design standard period may result in it being
impossible to maintain performance or malfunctions, etc.
• Afeeischargedforsafetyinspections.Directallrequeststooursalesofces,dealersortheserviceagenciesspeciedbythe
company.
• The design standard period is the standard period during which the product can be used safely without malfunctions, and it
does not represent the valid period of product warranty.
• See [Chapter 11. Maintenance] for details on daily maintenance inspections and replacement parts.
Unplug the power cord from the AC adapter during inspections, maintenance and
when replacing parts.
Failure to observe this may result in accidents caused by electric shocks or short-circuits.
Always use the parts specied in the instruction manual when replacing parts.
Theuseofnon-speciedpartsmayresultinthembecomingdamagedandunusable.
n
Measures to be Observed during Emergencies
!
CAUTION
If you detect anything abnormal (e.g. a burning smell), immediately disconnect the
AC adapter from the power outlet.
Continuingtousethebalancewithanabnormalitycouldleadtoreoranelectricshock.
n
Measures to be Observed during Power Outages
!
CAUTION
After a power outage, turn the power back ON.
When a power outage occurs, the power is shut off automatically. Therefore, begin operation from “Turning on the Power”
(
^
P.29) again.
n
Caution Labels
Cautions labels are placed in necessary locations on the balance to ensure that it is used correctly. In the event of
theselabelsbeingmislaidordamaged,contactaShimadzusalesofceorserviceagencytorequestnewlabels,
and then make sure they are situated in the correct locations.
[ATX324R example]
RS232C USB DEVISE
Use the AC adapter supplied
withthespeciedpowersupply
To Next Page
Loading...
Need help?
General
