59
8009389/YN39/V3-0/2015-08| SICK OPERATING INSTRUCTIONS|GM35
Subject to change without notice
CONNECTING THE SYSTEM CONTROL UNIT - SCU
– Click on “Configure interface” and check the following settings, and adapt when
necessary.
– Continue with “OK”.
▸ Continue the Connection Wizard with Next
The selected GM35 is added to the project tree.
If an error occurs, see
page 56.
6.1.5 Changing the user level
1. Menu: /Tools/Login
2. In UserLevel dialog window: Click Authorized Client.
Fig. 26: User level
3. Enter password:
4. “Login”
The current user level in SOPAS ET is shown in the bottom left corner.
User level Password
Authorized Client HIDE
[1]
Service GM35SERVICE
*)
[1] Upper case mandatory
To Next Page
Loading...
