Chapter 1
MSC800
10 Operating instructions | SICK 8011540/14B8/2019-06-06
Subject to change without notice
About these operating instructions
1.6 Symbols used
In order to make it easier to access information quickly, some information is highlighted as
follows in this documentation:
Note
A note refers to a potential risk of damage or loss of function of the MSC800 or the
devices connected to it.
Warning
A warning refers to specific or potential dangers to the physical safety of the user. It is
there to protect the user against accidents.
The safety mark next to the warning, on the left, refers to the type of accident risk, e.g.,
electricity-related. The ascending warning levels (CAUTION, WARNING, DANGER) refer to
the severity of the possible danger.
Always read the warnings carefully and make sure you comply with them.
This important note is there to advise you on special aspects.
An explanation provides background information about technical contexts.
A recommendation helps you to carry out an action in the best way possible.
A tip explains setting options in the SOPAS-ET configuration software.
Project
This font is used to label a term in the SOPAS-ET configuration software user interface.
A symbol refers to a button in the SOPAS-ET configuration software user interface.
“0x0”
This font is used to indicate messages issued by the MSC800.
This symbol designates a section which describes operation steps with the SOPAS-ET
configuration software.
Important
Explanation
Recommendation
TIP
To Next Page
Loading...
Need help?
General
