Chapter 2
MSC800
8011540/14B8/2019-06-06 Operating instructions | SICK 15
Subject to change without notice
2.3.5 Electrical installation work
Risk of injury due to electrical current
The MSC800 is connected to the mains voltage unit (AC 100 ... 264 V / 50 ... 60 Hz).
Comply with standard safety requirements when working on electrical plants.
Risk of injury due to electrical current
The socket in the MSC800, to which the mains voltage IN is also applied, is not equipped
with a residual current protective device (RCD) from the factory.
The socket can only be used by qualified electricians for service purposes, e.g., to
connect a laptop. If necessary, insert a mobile plug-in FI circuit-breaker in the socket
according to the safety concept provided by the customer.
The socket is not suitable for connecting work equipment such as drilling equipment,
cleaning equipment (e.g., vacuum), etc.
If necessary, insert an external automated mains voltage isolator (e.g., residual current
protective device) for the mains voltage IN of the MSC800 according to the safety
concept provided by the customer.
2.3.6 Repairs
Risk of damage to the MSC800
Repair work on the MSC800 may only be performed by qualified and authorized service
personnel from SICK AG.
To Next Page
Loading...
Need help?
General
