SICK MSC800

Chapter 5
MSC800
8011540/14B8/2019-06-06 Operating instructions | SICK 71
Subject to change without notice
Electrical installation
5.5 Pin assignment of the connections and assignment of the wire color
5.5.1 Logic unit connections
“ETHERNET 1”/“ETHERNET 2”/“ETHERNET 3” connections (Ethernet, max. 100 MBit/s)
PIN
Ethernet signal
Function
1
TD+
Sender+
2 TD– Sender–
3 RD+ Receiver+
4
n. c.
–
5
n. c.
–
6 RD– Receiver–
7 n. c. –
8
n. c.
–
Tab. 46 MSC800: pin assignment of the 8-pin RJ-45 female connectors “ETHERNET 1”,
“ETHERNET 2”, and “ETHERNET 3”
“AUX 1” connection (auxiliary data interface)
PIN Ethernet signal Function
1 n. c. –
2
RxD (RS-232)
Receiver
3
TxD (RS-232)
Sender
4 n. c. –
5 GND Ground
6
n. c.
–
7
n. c.
–
8 n. c. –
9 n. c. –
Tab. 47 MSC800: pin assignment of the 9-pin D-SUB male connector “AUX 1”
“PROFIBUS” connection
PIN
Signal
Function
1 n. c. –
2 n. c. –
3
RxD/TxD (B)
Receive and send data P
4
RTS control
Sender active
5 GND Ground
6 VCC +5 V DC
7
n. c.
–
8 RxD/TxD (A) Receive and send data N
9 n. c. –
Tab. 48 MSC800: pin assignment of the 9-pin D-Sub male connector “PROFIBUS”