SICK MSC800 User Manual

Chapter 2
MSC800
16 Operating instructions | SICK 8011540/14B8/2019-06-06
Subject to change without notice
On safety
2.4 Quick stop and quick restart
The MSC800 can be switched on and off via a main switch provided by the customer.
2.4.1 Switching off MSC800
 Turn off the supply voltage to the MSC800.
When switching off the MSC800, at the most, the following data will be lost:
• User-specific parameter sets in the logic unit of the MSC800 and in the ID sensors,
which are only temporarily saved in the devices
• Last reading result
• Daily operating hours counter.
2.4.2 Switching on MSC800
 Switch the supply voltage to the MSC800 back on again.
The MSC800 restarts operation with the last permanently saved configuration. The daily
operating hours counter is reset.

SICK MSC800 Specifications

General

Brand	SICK
Model	MSC800
Category	Controller
Language	English