Chapter 10
MSC800
8011540/14B8/2019-06-06 Operating instructions | SICK 129
Subject to change without notice
Process for the transmission of all parameter values from the working memory of the
connected MSC800 to the PC in the SOPAS-ET configuration software for display and
modification.
Is carried out when connecting the device and successfully establishing communication
after the scan process following a confirmed query in order to achieve synchronization
between the user interface and the MSC800. If necessary, can be triggered manually in
the COMMUNICATION menu (UPLOAD ALL PARAMETERS FROM THE DEVICE). The
parameter values must be displayed in the tabs in order to be able to modify the current
parameter value set.
Windows-oriented input interface in the SOPAS-ET configuration software for operation and
configuration of the MSC800.
Upload
User interface
To Next Page
Loading...
