FOR YOUR SAFETY 2
8027311 / V1-0/2022-04|SICK
Subject to change without notice
OPERATING INSTRUCTIONS|TDC-E (Telematic Data Collector)
2 For your safety
2.1 Intended use
The TDC-E gateway system is a system that receives and processes sensor data, and
then forwards this data to a higher-level infrastructure (cloud server or local server).
System functions can be extended by adding customized applications using the
microservices architecture.
Consequently, the TDC-E is designed for sensor-controlled monitoring tasks, vehicle
tracking, working time management, and access control, or for telemetry applications.
The gateway system uses one or more TDC-E devices to collect data. The devices
feature all the standard interfaces for integrating sensors.
The sensor data received can be transmitted to the cloud via the mobile network or via
a WLAN connection. In addition to the MQTT transmission protocol, WebSocket is also
supported. In addition, access to sensor data is possible via the integrated REST API
interface.
NOTE! Intended use also includes observance of this addendum, in particular the safety
notes as well as the repair and maintenance requirements.
2.2 General safety notes
▸
Please read this document through carefully and observe all the safety notes and
information before working with the TDC-E.
▸
Only qualified persons from the relevant departments are permitted to work on the
TDC-E.
▸
Follow operating processes.
▸
Follow local regulations.
▸
Follow all local regulations relating to working with electrical components.
• Only authorized persons are permitted access to the TDC-E.
System damage/transport damage
Damage to the individual components can lead to malfunctions of the system as a whole.
▸
Do not ignore any damage caused to system components during transport.
▸
In case of damage, contact SICK Service.
To Next Page
Loading...
