Siemens ACCESS 9340 - Page 164

© 2008 Siemens Energy & Automation, Inc. All Rights Reserved
ACCESS 9340 and 9360 Meters PMCM-9340D-0208
Appendix A—Meter Register List 2/2008
EN–156
4026
Previous Module Type
Position A
— — 0 – 7
Indicates the I/O option module present the last
time the meter was reset.
0 = Not Installed
1 = Reserved
2 = IO-22
3 = IO-26
4 = IO-2222
4027
Previous Module Type
Position B
— — 0 – 7
Indicates the I/O option module present the last
time the meter was reset.
0 = Not Installed
1 = Reserved
2 = IO-22
3 = IO-26
4 = IO-2222
4028 Reserved — — — Reserved for future development
4030
Last Module Type
Standard IO
— — 255 Should always be 255
4031
Last Module Type
Position A
— — 0 – 7
Indicates the last valid I/O module type
successfully installed
0 = Not Installed
1 = Reserved
2 = IO-22
3 = IO-26
4 = IO-2222
4032
Last Module Type
Position B
— — 0 – 7
Indicates the last valid I/O module type
successfully installed
0 = Not Installed
1 = Reserved
2 = IO-22
3 = IO-26
4 = IO-2222
4033 Reserved — — — Reserved for future development
4080 Reserved — — — Reserved for future development
4081
Hardware Revision
Number
Analog I/O Option
Module
Position A
— — ASCII/HEX 4 ASCII bytes
Table A–4: Registers for Inputs and Outputs
Reg Name Scale Units Range Notes