Siemens ACCESS 9340 - Page 163

© 2008 Siemens Energy & Automation, Inc. All Rights Reserved
PMCM-9340D-0208 ACCESS 9340 and 9360 Meters
2/2008 Appendix A—Meter Register List
EN–155
4011
IO Module Health
Status
Standard IO
— — 0x0000 – 0x000F
0 = OK
1 = Error
Bit 00 = Module error summary
Bit 01 = Point error summary
Bit 02 = Module removed while meter is running
Bit 03 = Module change validation failed
Remaining bits unused
4012
IO Module Health
Status
Position A
— — 0x0000 – 0x000F
0 = OK
1 = Error
Bit 00 = Module error summary
Bit 01 = Point error summary Bit
Bit 02 = Module removed while meter is running
Bit 03 = Module change validation failed
Remaining bits unused
4013
IO Module Health
Status
Position B
— — 0x0000 – 0x000F
0 = OK
1 = Error
Bit 00 = Module error summary
Bit 01 = Point error summary Bit
Bit 02 = Module removed while meter is running
Bit 03 = Module change validation failed
Remaining bits unused
4014 Reserved — — — Reserved for future development
4020
Present Module Type
Standard IO
— — 255 Should always be 255
4021
Present Module Type
Position A
— — 0 – 7
0 = Not Installed
1 = Reserved
2 = IO-22
3 = IO-26
4 = IO-2222
4022
Present Module Type
Position B
— — 0 – 7
0 = Not Installed
1 = Reserved
2 = IO-22
3 = IO-26
4 = IO-2222
4023
Extended MBUS
Device
— — — 0x39 = Logging Module
4024 Reserved — — — Reserved for future development
4025
Previous Module Type
Standard IO
— — 255 Should always be 255
Table A–4: Registers for Inputs and Outputs
Reg Name Scale Units Range Notes