Siemens ACCESS 9340 - Page 217

© 2008 Siemens Energy & Automation, Inc. All Rights Reserved
PMCM-9340D-0208 ACCESS 9340 and 9360 Meters
2/2008 Appendix B—Using the Command Interface
EN–209
I/O Point Numbers
All inputs and outputs of the meter have a reference number and a
label that correspond to the position of that particular input or output.
• The reference number is used to manually control the input or
output with the command interface.
• The label is the default identifier that identifies that same input or
output. The label appears on the display, in WINPM.NET, and on
the option card.
• See Table B–3 on page 209 for a complete list of I/O Point
Numbers
Table B–3: I/O Point Numbers
Module Standard I/O 9340-60-I/O26 9340-60-I/O2222 I/O Point Number
—
KY
S1
——
1
2
A—
A-R1
A-R2
A-S1
A-S2
A-S3
A-S4
A-S5
A-S6
A-R1
A-R2
A-S1
A-S2
A-AI1
A-AI2
A-AO1
A-AO2
3
4
5
6
7
8
9
10
B—
B-R1
B-R2
B-S1
B-S2
B-S3
B-S4
B-S5
B-S6
B-R1
B-R2
B-S1
B-S2
B-AI1
B-AI2
B-AO1
B-AO2
11
12
13
14
15
16
17
18