About this document
7
Siemens Building Technologies 007831_a_en_--.doc
Fire & Security Products 03.2004
1 About this document
Purpose
This document describes the function of hardware modules of the control unit
FC700A. The consistent adherence to these instructions is a prerequisite for a safe
application.
Scope
This document contains information for all modules FC700A, valid for all software
versions.
Target groups
This product documentation and the work instructions are aimed at the following
persons, who have a particular function and have the corresponding training and
qualification.
Group of persons Activity Qualification
Project Manager The project manager is responsible for the local
project management. He co-ordinates the sched-
ules of all groups of people working on a project
as well as resources. He also continuously ob-
tains the technical information required for project
realization.
He has had the technical training appropriate to
his function and the size of a project or the prod-
uct line used in the project and has attended the
training courses for project managers at the sup-
plier’s works.
Installation personnel They install product, device or system compo-
nents and subsequently carry out a general per-
formance check.
Professional training in the field of building auto-
mation or electrical installations.
Commissioning personnel The configuration of the products, devices or
systems for specific customers at the place of
installation.
They check serviceability and officially clear the
product, device or system for use by the operator
/ customer. They are also responsible for trouble-
shooting.
They have had the professional training appropri-
ate to their function and to the commissioning of
the products, systems and devices and have
attended the technical training courses for com-
missioning personnel.
Product Specialist He programs and parameterizes the product to
comply with the requirements for specific coun-
tries and customers. He provides support in the
solving of technical problems and supports all
groups of people when product faults arise.
He has had technical training appropriate to his
function and has attended the technical training
courses for product specialists at the supply plant.
Reference documents
Information in Document
007836 Planning
007827 Installation housing H26..../H28...
007832 Visualizer Customizing / End user (not yet available)
007835 Operating instructions
007828 Installation / Hardware Commissioning
007833 Maintenance instructions
007894 Templates for inscription stripes
007895 Operating platform for Tools
Work and operational safety
Before personnel begin work on the system they must have read and understood the related operating
instructions, in particular chapter 2 ”Safety regulations”.
To Next Page
Loading...
Need help?
General
