Siemens PFA-100 System - Page 7

Table of contents
PFA-100 System – Instruction Manual (US) – Version 1.0.1
3TOC
6.3 Technical specifications 6-7
6.3.1 Physical 6-7
6.3.2 Electrical 6-7
6.3.3 Environmental 6-8
6.3.4 General 6-8
6.3.5 Printer 6-9
6.3.6 Software 6-9
6.4 Data connections 6-9
6.5 Laboratory information system (LIS) 6-11
6.6 Principle of operation 6-12
7 Setup and changing configuration 7-1
7.1 Priming the analyzer 7-1
7.2 Setup of the software 7-3
7.2.1 Selecting language 7-3
7.2.2 Setting the time format 7-4
7.2.3 Setting the date format 7-6
7.2.4 Patient identification request 7-7
7.2.5 Analyzer initialization 7-8
7.3 Configuration 7-8
7.3.1 Low/high flag ranges 7-9
7.3.2 Audible keys 7-11
7.3.3 Laboratory information system (LIS) 7-12
8 Performing tests 8-1
8.1 Test request with patient ID number option disabled 8-4
8.1.1 Single test 8-4
8.1.2 Duplicate test or two test types, same patient ID 8-4
8.1.3 Two different test types, different patient ID 8-5
8.2 Test request with patient ID number option enabled 8-6
8.2.1 Single test 8-6
8.2.2 Duplicate test or two test types, same patient ID 8-7
8.2.3 Two test types, different patient ID 8-8