PFA-100 System – Instruction Manual (US) – Version 1.0.1
4TOC
8.3 Canceling tests 8-9
8.4 Printing results 8-10
8.4.1 Automatic printing after test 8-10
8.4.2 Printing the results of the last run 8-10
8.4.3 Printing stored test results 8-11
8.4.4 Printing usage history 8-12
9 QC procedures 9-1
9.1 Self test and daily alignment check for trigger solution dispensing 9-2
9.2 Run control 9-6
9.3 Printing control results 9-9
10 Cleaning and disinfection 10-1
10.1 Cleaning the analyzer 10-1
10.2 Disinfecting the analyzer 10-1
11 Maintenance 11-1
11.1 Replacing trigger solution 11-2
11.2 Priming the system 11-4
11.3 O-Ring maintenance 11-6
11.3.1 Maintaining and inspecting the O-Ring 11-6
11.3.2 Removing the O-Ring 11-7
11.3.3 Installing the O-Ring 11-9
11.3.4 Cleaning O-Ring using cleaning pads 11-10
11.4 Replacing printer paper 11-13
11.5 Replacing printer ribbon 11-15
11.6 Replacing fuses 11-16
To Next Page
