General information
2.1 Properties of the ATC6300 transfer control device
3KC ATC6300 transfer control device
10 Manual, 03/2018, L1V30535632002A-01
The ATC6300 permits voltage measurement not only between L-L, but also between N-L.
The following parameters are measured by the ATC6300:
● Phase sequence and phase failure
● Minimum and maximum voltage
● Voltage unbalance
● Minimum and maximum frequency
The ATC6300 transfer control device can be used in conjunction with Siemens switching
devices, e.g. in the following industrial areas in which a continuous power supply needs to be
ensured.
● Industry
– Production lines in continuous operation
– Engine rooms
– Auxiliary facilities in essentially important thermal power stations
– Pumps
– Cooling systems
– Fans
To Next Page
Loading...
