Product description
4.5 Display pages of the ATC6300
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01
27
This shows:
● how often one of the two sources has been switched to the automatic and manual mode
● how often the alarms A03 and A04 (see chapter Alarms (Page 46)) have been active
● how long a supply has been maintained by the sources
● how long the sources have been within and and outside the defined thresholds
● how long the load has been without current
● how many shutdowns have been initiated
Measured maximum voltage of the DC battery power supply
Upper limit of the battery voltage
Lower limit of the battery voltage
Measured minimum voltage of the DC battery power supply
The Battery Status submenu indicates the current battery/DC supply voltage.
It shows:
● the lower and upper thresholds of the battery voltage
● the measured minimum and maximum values of the battery voltage
If no DC supply is used, then this menu is not visible.
To Next Page
Loading...
