Siemens SIMATIC ET 200iSP

Technical speci󹪝cations
Minimum switching current 2 mA
1
R = load resistance + line resistance
2
An unconnected contact is required as the input
Approvals
ATEX II 2 G(1) GD and I M2
Ex ib [ia Ga] IIC T4 Gb
Ex ib [ia IIIC Da] IIC T4 Gb
Ex ib [ia] IMb
KEMA 04 ATEX 1249
0344
IECEx IECEx KEM 05.0011
INMETRO
R
#3
0$1
BR-Ex ib [ia Ga] IIC T4 Gb
BR-Ex ib [ia IIIC Da] IIC T4 Gb
BR-Ex ib [ia] I Mb
FM Class I, Zone 1, AEx ib [ia] IIC T4;
Ex ib [ia] IIC T4
NI, Class I, DIV. 2, GP. A,B,C,D
AIS, Class I DIV. 1, GP. A,B,C,D;
Class II, III, GP. E, F, G
cULus
R
-*45&%&
Process Cont. Eq. for Use in HAZ.LOC.
Class I, Zone 1, AEx ib [ia] IIC T4;
Ex ib [ia] IIC T4
ASSOC APP. CL. I, DIV.2, GP. A,B,C,D
PROVIDING INT. SAFE CIRCUITS FOR
CL. I, GP. A,B,C,D;
CL. II, III, GP. E,F,G
CCC Ex ib [ia Ga] IIC T4 Gb
Ex ib [iaD] IIC T4 Gb
UKCA DEKRA 21UKEX0085
Digital electronic modules
13.2 Digital electronics module 4 DO
ET 200iSP
324 Operating Instructions, 11/2022, A5E00247483-AK