Note
You must take appropriate measures to ensure that U
m
= 250 V DC, 250 V AC is not exceeded.
Approvals
ATEX II 2 G and I M2
Ex db eb [ib] IIC T4 Gb
Ex db eb [ib] Mb
KEMA 04 ATEX 2263
IECEx IECEx KEM 05.0004
INMETRO
BR-Ex db eb [ib] IIC T4 Gb
BR-Ex db eb [ib] Mb
FM Class I, Zone 1, AEx db eb [ib] IIC T4;
Ex db eb [ib] IIC T4
NI, Class I, DIV.2, GP. A,B,C,D T4
Class II, III, GP E,F,G
cULus
Process Cont. Eq. for use in HAZ.LOC.
Class I, Zone 1, AEx db eb [ib] IIC T4;
Ex de [ib] IIC T4
Class I, DIV.2, GP. A,B,C,D T4
CCC Ex d e [ib Gb] IIC T4 GB
UKCA DEKRA 21UKEX0027
11.2 Power supply PS 120/230 VAC
Article number
6ES7138-7EC00-0AA0
Properties
WARNING
Death or serious injury may occur if the following precautions are not taken
There must be a wait of at least 2 minutes after unlocking the power supply in potentially
explosive atmospheres. Then the power supply of the ET 200iSP can be safely disconnected.
Power Supply
11.2 Power supply PS 120/230 VAC
ET 200iSP
272 Operating Instructions, 11/2022, A5E00247483-AK
To Next Page
Loading...
Need help?
General
