Siemens SIMATIC ET 200iSP

Examples of HART parameters
The following table represents HART parameters of the di󹪜erent groups:
Table 14-31 Examples of HART parameters
Parameter group Parameters of the HART 󹪝eld device
Universal Measured value or manipulated variable (primary
variable), manufacturer name, measuring point
identi󹪝er ("tag"), or identi󹪝er for actuator, addition‐
al measured values or manipulated variables.
Common practice Measuring range, 󹪝lter time, interrupt parameters
(message, interrupt and warning limits), output
range
Device-speci󹪝c Special diagnostics information
14.10.4 Integration of HART 󹪝eld devices with ET 200iSP
Use in ET 200iSP
With a HART analog module, you can connect one 󹪝eld device to each of the four channels. The
module operates as HART master, the 󹪝eld devices as HART devices.
SIMATIC PDM sends and receives data via the HART analog module, comparable to a client for
which the HART analog module is user as a server.
Analog electronic modules
14.10 Basics of HART
ET 200iSP
392 Operating Instructions, 11/2022, A5E00247483-AK