Siemens SIMATIC ET 200iSP User Manual

Technical speci󹪝cations
• Load of 2-wire transmitter
max. 750 Ω
1
Time taken to reach 63 % of the jump value
2
Phase current is located in the current limitation. The current limitation starts at 25 mA. Short circuit
when output load <100 Ω.
Approvals
ATEX II 2 G(1) GD and I M2
Ex ib [ia Ga] IIC T4 Gb
Ex ib [ia IIIC Da] IIC T4 Gb
Ex ib [ia] I Mb
KEMA 04 ATEX 1244
0344
IECEx IECEx KEM 05.0006
INMETRO
R
#3
0$1
BR-Ex ib [ia Ga] IIC T4 Gb
BR-Ex ib [ia IIIC Da] IIC T4 Gb
BR-Ex ib [ia] I Mb
FM Class I, Zone 1, AEx ib [ia] IIC T4;
Ex ib [ia] IIC T4
NI, Class I, DIV. 2, GP A,B,C,D T4
AIS, Class I DIV. 1, GP. A,B,C,D
Class II, III, GP. E,F,G
cULus
R
-*45&%&
Process Cont. Eq. for Use in HAZ.LOC.
Class I, Zone 1, AEx ib [ia] IIC T4;
Ex ib [ia] IIC T4
ASSOC APP. CL. I, DIV.2, GP. A,B,C,D
PROVIDING INT. SAFE CIRCUITS FOR
CL. I, GP. A,B,C,D;
CL. II, III, GP. E,F,G
CCC Ex ib [ia Ga] IIC T4 Gb
Ex ib [iaD] IIC T4 Gb
UKCA DEKRA 21UKEX0089
14.3 Analog electronics module 4 AI I 4WIRE HART
Article number
6ES7134-7TD50-0AB0
Analog electronic modules
14.3 Analog electronics module 4 AI I 4WIRE HART
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK 351

Siemens SIMATIC ET 200iSP Specifications

General

Brand	Siemens
Model	SIMATIC ET 200iSP
Category	I/O Systems
Language	English