Siemens SIMATIC ET 200iSP User Manual

Article number 6ES7152-1BA00-0AB0
Weights
Weight, approx. 440 g
Approvals
ATEX II 2 G Ex ib T4 IIC Gb
Ex ib T4 IIC Gb
DEKRA 22ATEX0036
0344
IECEx IECEx DEK 22.0020
INMETRO
R
#3
0$1
BR-Ex ib IIC T4 Gb;
BR-Ex ib I Mb
FM Class I; Zone 1, AEx ib IIC T4;
Ex ib IIC T4
NI, Class I, DIV.2, GP. A.B.C.D T4
Class II, III, GP. E,F,G
cULus
R
-*45&%&
Process Cont. Eq. for use in HAZ.LOC.
Class I; Zone 1, AEx ib IIC T4;
Ex ib IIC T4
Class I, DIV.2, GP. A.B.C.D T4
CCC Ex ib IIC T4 Gb
UKCA
12.1.1 Parameters for IM 152-1PN
Parameters
The procedure for setting parameters is described in the Chapter "Commissioning (Page 155)".
Table 12-1 Parameter for the interface module IM 152-1PN
Parameters IM 152-1PN Range of values Default Applicability
Operation at Preset <> Actual
Con󹪝guration
• Disable
• Enable
Disable ET 200iSP
Redundant Power Supply di‐
agnostics
• No redundant power sup‐
ply
• Redundant Power Supply
• Redundant Power Supply
required
No redundant power supply ET 200iSP
Network interface module
12.1 PROFINET interface module IM 152-1PN
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK 281

Siemens SIMATIC ET 200iSP Specifications

General

Brand	Siemens
Model	SIMATIC ET 200iSP
Category	I/O Systems
Language	English