Siemens SIMATIC ET 200iSP

5.4 Installing Terminal Modules for the Interface Module and
Electronics Modules
Properties
• The terminal modules are used to accommodate the interface module and the electronic
modules
– TM-IM/EM: Terminal module for the interface module and electronic module, located
directly to the right of the terminal module TM-PS-A
– TM-IM/IM: Terminal module for 2 interface modules (redundancy of the interface
modules), located to the right of the TM-PS-A or TM-PS-B.
– TM-EM/EM: Terminal module for the electronic modules, are located to the right of the
TM-IM/EM or TM-IM/IM terminal module.
– TM-RM/RM: Terminal module for the digital output modules 2 DO Relay UC60V/2A, are
located to the right of the terminal module TM-IM/EM or TM-IM/IM.
• The terminal modules can be prewired (without electronic modules).
Requirements
The mounting rail is installed.
Required tools
3.5 mm screwdriver.
4.5 mm screwdriver.
Installing
5.4 Installing Terminal Modules for the Interface Module and Electronics Modules
ET 200iSP
112 Operating Instructions, 11/2022, A5E00247483-AK