Siemens SIMATIC ET 200pro - Rear wall bus modules; 6.1 Rear wall bus modules for special modules and motor starter

Commissioning
6.5 Basic commissioning
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
75
5.
Select the correct frequency for your Inverter and a
t-
tached motor.
The use of the 87 Hz characteristic allows the motor to
operate at 1.73 times of its normal speed.
6.
At this stage the wizard will begin to ask for the data
relating specifically to the attached motor. The data is
obtained from the motor rating plate.
7.
The Motor Data screen in
dicates the frequency charac-
teristic of the attached motor.
8.
Input the correct Motor Voltage from the motor rating
plate.
9.
Input the correct Motor Current from the motor rating
plate.
10.
Input the correct Power Rating from the motor rating
plate.