Siemens SIMATIC ET 200SP - Labeling ET 200 SP; Factory Markings

Wiring
6.15 Labeling ET 200SP
Distributed I/O system
124 System Manual, 09/2019, A5E03576849-AJ
6.15 Labeling ET 200SP
6.15.1 Factory markings
Introduction
For better orientation, the ET 200SP is equipped with various markings ex factory, which
help in the configuration and connection of the modules.
Factory markings
● Module labeling
● Color coding of module type
– Digital input modules: white
– Digital output modules: black
– Analog input modules: light blue
– Analog output modules: dark blue
– Technology module: turquoise
– Communication module: light gray
– Special module: mint green
● Module information
– Functional version of the module, e.g. "X/2/3/4" (= functional version 1)
– Firmware version of the module at delivery, e.g. "V1.0.0"
– Color code for usable color identification label, e.g. "CC0"
– Usable BaseUnit type, e.g. "BU: A0"