Distributed I/O system
291 System Manual, 09/2019, A5E03576849-AJ
Accessories for the ET 200SP distributed I/O system
Table B- 1 Accessories, general
Cover for the BusAdapter interface
PROFIBUS FastConnect bus connector
Server module (spare part)
• 15 mm wide
5 units 6ES7133-6CV15-1AM0
• 20 mm wide
5 units 6ES7133-6CV20-1AM0
24 V DC connector (spare part)
Shield connection for BaseUnit (shield contacts and shield terminals)
Reference identification label, sheet with 16 labels
Labeling strips (for labeling the I/O modules)
• Roll, light gray labeling strips (with a total of 500 strips), film, for labeling
with thermal transfer roll printer
1 unit 6ES7193-6LR10-0AA0
• Roll, yellow labeling strips (with a total of 500 strips), film, for labeling with
thermal transfer roll printer
1 unit 6ES7193-6LR10-0AG0
• DIN A4 sheets, light gray labeling strips (with a total of 1000 labels), paper,
perforated, for labeling with laser printer
10 units 6ES7193-6LA10-0AA0
• DIN A4 sheets, yellow labeling strips (with a total of 1000 labels), paper,
perforated, for labeling with laser printer
10 units 6ES7193-6LA10-0AG0
Electronic coding element (type H) (spare part)
Electronic coding element (type F, for fail-safe modules) (spare part)
Mounting rails, tinned steel strip
• Length: 483 mm
1 unit 6ES5710-8MA11
• Length: 530 mm
1 unit 6ES5710-8MA21
• Length: 830 mm
1 unit 6ES5710-8MA31
• Length: 2000 mm
1 unit 6ES5710-8MA41