Technical specifications
14.1 Standards, approvals and safety notes
Distributed I/O system
System Manual, 09/2019, A5E03576849-AJ
269
CE marking
The ET 200SP distributed I/O system meets the general and safety-related requirements of
the following directives and conforms to the harmonized standards (EN) for programmable
controllers published in the official journals of the European Union:
● 2014/35/EU "Electrical equipment designed for use within certain voltage limits" (Low
Voltage Directive)
● 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
● 2014/34/EU "Equipment and protective systems intended for use in potentially explosive
atmospheres" (Explosion Protection Directive)
● 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
● 2006/42/EC "Machinery Directive" for ET 200SP fail-safe modules
The EC Declarations of Conformity are available for the responsible authorities and are kept
at the following address:
Siemens AG
Digital Industries
Factory Automation
DI FA AS SYS
Postfach 1963
D-92209 Amberg
They are also available for download on the Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/
) website, keyword "Declaration of
Conformity".
cULus approval
Underwriters Laboratories Inc., complying with
● UL 508 (Industrial Control Equipment) OR UL 61010-1 and UL 61010-2-201
● CSA C22.2 No. 142 (Process Control Equipment) OR CSA C22.2 No. 61010-1 and CSA
C22.2 No. 61010-2-201
OR
To Next Page
Loading...
