Siemens SIMATIC S7-1500 Automation System User Manual

Display of the CPU
S7-1500 Automation System
146 System Manual, 01/2013, A5E03461182-01
Available language settings
You can set the following languages separately for menu and message texts:
● German
● English
● French
● Spanish
● Italian
● Chinese
The settings are carried out directly at the display in the "Display" menu or in STEP 7 in the
hardware configuration of the CPU under User interface languages".
To display message texts on the display these have to be loaded into the CPU as a software
component. To do so, select "Consistent download" under "Text libraries" in the "Load
preview" dialog.

Siemens SIMATIC S7-1500 Automation System Specifications

General

Series	SIMATIC S7-1500
Programming	TIA Portal (Totally Integrated Automation Portal)
Protection Class	IP20
CPU	Various models available (e.g., CPU 1511-1 PN, CPU 1518-4 PN/DP)
Controller Type	Modular Controller
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Communication Interfaces	PROFINET, PROFIBUS, Ethernet, OPC UA
Digital Inputs	Varies by model and expansion modules
Digital Outputs	Varies by model and expansion modules
Analog Inputs	Varies by model and expansion modules
Analog Outputs	Varies by model and expansion modules
Backplane Bus	High-speed backplane bus for fast communication between modules
Redundancy	Supported with specific models and configurations
Safety	Integrated safety functions available
Scalability	Highly scalable with modular expansion
Operating Temperature	0°C to 60°C